HP Laptop computers rely on memory to open programs faster, handle multiple applications, and even connect to the internet in general. If the time comes for you to replace or add more memory to your home computer, you need to have several key points in mind or simply allow pros to repair computer RAM troubles. Remote computer services have gathered some useful steps to accurately add memory to your notebook or repair computer RAM problems without further issue.
Know The Right Memory To Use
It would be convenient to head to our favorite store and pick up any memory stick and slap it in our laptops; unfortunately, we need to be slightly more meticulous in our efforts because each HP laptop comes equipped with different motherboard configurations and too much or too little memory could cause permanent damage or even fry your laptop. Therefore, one great way to find out the perfect memory to use is to go back towards HP manufacturer’s website and find your model. You should never go DOWN in memory; always up.
Always buy equal amounts as well (i.e. two 2GB sticks, not one 1GB and one 2GB). Remote computer services can assist with home computer repairs such as HP laptop RAM placement and repair computer issues RAM may be causing. If unsure, consult your favorite computer directory to find the correct RAM amount.
Power Off And Gaining Access To Memory Door
Once you have successfully obtained the proper memory perfect for your model, you need to close your laptop with the power off and disconnect all power sources. You’ll then need to flip the laptop over (gently) and set down so you have access to the bottom. You are looking for either a square door with 1 screw or, in newer models, a door with 3 screws that is shaped like a gun. You need to put on a pair of gloves and use a non-magnetic small Phillips screwdriver so no static can enter the motherboard. If this doesn’t prove advantageous, you’ll need to consult computer services NJ natives use often – Dave’s Computers, the professional firm specializing in repair computer owners need.
Removing The Memory
With your gloves still on, you’ll need to pull out the smaller HP ram you are replacing; it may take some oomph to pull it. Try to gently rock it as you pull upward to get the memory out; never rip really hard as you could pull pins from the female part of the memory. Once you have the memory out, put it on a non-static surface as you can reuse this or give it to someone who needs more memory with a compatible computer. Again, sometimes you’ll not want to handle this step; Remote computer services can provide the intuitive insight while speeding up your PC.
Repair Computer By Installing New Memory
Grabbing the sides of the new memory with your gloves, you’ll want to gently but firmly push the memory down into the slot until it locks into place. Repeat with the other stick of memory, pulling the old HP laptop RAM stick out if you’ve not done so already.
Once you have installed both sticks of memory, (or singular stick, depending on if your using a netbook or regular laptop), you can now put your memory door back on snug yet not over-tightening the screw as you may strip it. Turn laptop back over, plug back in and power up. Should everything have gone ok, your HP laptop will have already recognized the memory change and you’ll be on your way to faster computing; Remote computer services can, again, repair computer problems which are stemming from RAM misplacements.
